MDR-3132 舱级储能热失控在线监测仪

        舱级储能热失控在线监测仪能够实现对电芯热失控时释放出的颗粒物浓度、CO2、CO、气压等指标的有效监测，并将测量信号通过CAN总线传递给电池管理系统（BMS），从而起到电芯热失控颗粒物浓度、CO2、CO、气压的监测和预警作用。当电芯发生热失控时，传感器能够迅速检测到气体压力的变化，并通过CAN总线将这些信息实时传递给BMS。BMS接收到信号后，能够及时采取相应的措施，如触发预警机制或启动安全策略，以防止热失控进一步扩散，保障电池系统的安全。
        Cabin level energy storage thermal runaway online monitor CAN effectively monitor the particle concentration, CO2, CO, air pressure and other indicators released during the thermal runaway of the battery cell, and transmit the measurement signal to the battery management system (BMS) through the CAN bus, thus playing a monitoring and warning role in the concentration of thermal runaway particles, CO2, CO, and air pressure of the battery cell. When thermal runaway occurs in the cell, the sensor CAN quickly detect the change in gas pressure and transmit this information to the BMS in real time through the CAN bus. After receiving the signal, the BMS can take appropriate measures in time, such as triggering the early warning mechanism or initiating the safety policy, to prevent the further spread of thermal runaway and ensure the safety of the battery system.
    产品特点/Product characteristics：
    ●精度高、响应快、超低功耗、长寿命

    ●传感器采用车规级成熟电路设计，可适应恶劣车载环境

    ●采用 CAN通讯，防护等级可达IP65

检测对象/Detection object：颗粒物（PM）、二氧化碳（CO2）、一氧化碳（CO）、气压（P）

检测原理/Detection principle：颗粒物：红外散射；二氧化碳：NDIR双通道；一氧化碳：金属氧化物半导体气体检测技术(MOX)

检测范围/Detection range：PM:0~5mg/m3；CO2:0~10000ppm；CO:0~1000ppm；P:80kPa~120kPa

分辨率/Resolution：PM:1ug/m3；CO2/CO:1ppm；P:0.1kPa

精度/Precision：PM:±15ug/m3 @≤100ug/m3、±15%读数@＞100ug/m3；CO2:±200ppm或±20%读数；CO:±40ppm或±30%读数；P:±1kPa

输出方式/Output mode：CAN

响应时间/Response time：T90＜15S

壳体材料阻燃等级/Shell material flame retardant grade：UL94 V-0

工作环境/Working environment：-40℃~85℃；0~95%RH（非凝结）

供电电压/Explosion-proof class：9~32VDC

工作电流/Working current：正常模式：≤30mA，@+12VDC；低功耗模式：≤500uA，@+12VDC；休眠模式：≤50uA,@+12VDC